UL 94 V-0, metal
foil Terminations:
Tinned wire Marking:
Marking: Black on Silver
Electrical Data
Capacitance
range: 1000 pF to 0.22 µF
(E12-values on request)
Rated voltages: 300VAC, 440VAC, 500VAC
Continuous DC voltage* (general guide):
< 730V for 300VAC < 850V for 440VAC and 500VAC
Capacitance tolerance: ±20%
Operating temperature range: -40°C to +110°C Climatic test category: 40/110/56/C in accordance with
IEC
Insulation resistance at +20°C: > 12 x 103 M
Measuring voltage:
100V/1 min. for 300VAC and 440VAC
500V/1 min. for 500VAC Dissipation factors:
tan< 13 x 10-3
at 1kHz and +20°C
Approvals:
Test specifications:
In accordance with DIN EN 60384-14 Maximum
pulse rise time:
for pulses equal to a voltage amplitude
with x 300VAC = 425V,
with x 440VAC = 623V,
with x 500VAC = 707V
according to IEC 60384-14
Test voltage: 3000VDC, 2sec Reliability: Operational life > 300000
hours
Failure rate < 1 fit (0.5 x Ur and
40°C) Graphs:
To minimize or avoid shock and/or
vibration stresses to terminating wires and
solder connections we recommend to fix voluminous
resin-potted MP capacitors as from e.g. PCM
22.5mm in an appropriate way since for
constructional reasons they do not sit tight on
the board.
Available taped and reeled up to and
including PCM 22.5mm
* If safety-approved EMI suppression capacitors are operated with a DC voltage being above the specified AC voltage rating the given approvals are no longer valid (DIN EN 60384-14).
Furthermore the permissible pulse rise time du/dt (Fmax.) will be subject to a reduction according to
Fmax. = Fr x x UAC / UDC
if the DC operating voltage UDC is higher than x UAC
Particularly
high reliability against 
active and passive
flammability
< 13 x 10-3 
x 300VAC = 425V,
