Home About us Products Technical Info Samples Distribution News Contact Parametric Search
ImprintPrint page
Products:
SMD Capacitors
Capacitors in PCM 2.5 mm 
Capacitors in PCM 5 mm 
Film/Foil Capacitors in PCM 7.5 - 15 mm 
Metallized Capacitors in PCM 7.5 - 52.5 mm 
Pulse Capacitors 
RFI Capacitors 
Snubber Capacitors 
GTO Capacitors 
DC-Link Capacitors 

You are here: HomeProductsMetallized Capacitors in PCM 7.5 - 52.5 mmMKP 4 page 1

Overview

 

MKS 4

 

MKP 4

 

PDF-File

 

 

Page 2
 
Metallized Polypropylene (PP) Capacitors in PCM 7.5 mm to 52.5 mm
 
Special Features
High volume/capacitance ratio
Self-healing
Very low dissipation factor
Negative capacitance change versus
temperature
Very low dielectric absorption
According to RoHS 2011/65/EU
Typical Applications
For high frequency applications e.g.
Sample and hold
Timing
Oscillating circuits
High frequency coupling and decoupling
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal: Red.
Electrical Data

Capacitance range:
0.01 µF to 150 µF (E12-values on request)
Rated voltages:
100VDC, 250VDC, 400VDC, 630VDC, 1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
-55°C to +100°C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance
at +20°C:
C < 0.33 µF: > 1 x 105 M
(mean value: 5 x 105 M)
C > 0.33 µF: > 30000 sec (MxµF)
(mean value: 100000 sec)
Measuring voltage: 100V/1 min.
Dissipation factors at +20°C:

tan < 10 x 10-4 at 1kHz (C < 50 µF)
tan < 15 x 10-4 at 1kHz (C > 50 µF)
Test specifications:
In accordance with IEC 60384-16
Test voltage:
1.6 Ur, 2 sec
Dielectric abso
rption: 0.05%

Voltage derating:
A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 2 fit (0.5 x Ur and 40°C)
Specific dissipation:

Box size
W x H x L
in mm

Specific dissipation
in Watts per K above the
ambient temperature
35x50x57
45x55x57
45x65x57

0.132
0.164
0.184

* other box sizes

 

Graphs:

Soldering:

Maximum pulse rise time: for pulses equal to the rated voltage

Capacitance
pF/µF
max. pulse rise time V/µsec at TA < 40°C
100VDC 250VDC 400VDC 630VDC 1000VDC
0.01 ...0.022
0.033...0.068
0.1...0.22
0.33...0.68
1.0...2.2
3.3...4.7
6.8...10
15...33
47...150
450
250
150
100
75
60
40
35
10
450
250
150
100
100
100
50
50
13
450
300
200
150
100
100
60
18
-
500
350
250
200
150
120
85
36
-
550
400
300
200
150
140
100
-
-
 
Mechanical Tests   Packing
Pull test on pins:
d < 0.8 Ø: 10 N in direction of pins
d > 0.8 Ø: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29
  Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm.

Detailed taping information:


Example for ordering / Part number:
 

 

Page 2