Home About us Products Technical Info Samples Sales Network News Contact Parametric Search
ImprintPrint page
Products:
SMD Capacitors
Capacitors in PCM 2.5 mm 
Capacitors in PCM 5 mm 
Film/Foil Capacitors in PCM 7.5 - 15 mm 
Metallized Capacitors in PCM 7.5 - 52.5 mm 
Pulse Capacitors 
RFI Capacitors 
Snubber Capacitors 
GTO Capacitors 
DC-Link Capacitors 

You are here: HomeProductsPulse CapacitorsMKP 10 page 1

Overview

 

MKP 10

 

FKP 4

 

FKP 1

 

PDF-File

 

 

Page 2
 
Polypropylene (PP) Capacitors for Pulse Applications with Double-Sided Metallized Electrodes and Schoopage Contacts in PCM 7.5 mm to 52.5 mm
 
Special Features
Pulse duty construction
Self-healing
Very low dissipation factor
Negative capacitance change versus
temperature
According to RoHS 2011/65/EU
Typical Applications
For pulse applications e.g.
Switch mode power supplies
TV and monitor sets
Lighting
Audio/video equipment
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Double-sided metallized plastic film
Internal construction:
Encapsulation:
Solvent-resistant, flame retardent plastic case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal: Red.
Electrical Data
Capacitance range:
1000 pF to 47 µF (E12-values on request)
Rated voltages:
100VDC, 250VDC, 400VDC, 630VDC, 1000VDC, 1600VDC, 2000VDC, 2500VDC, 3000VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
-55°C to +100°C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance
at +20°C:
C < 0.33 µF: > 1 x 105 M
(mean value: 5 x 105 M)
C > 0.33 µF: > 30000 sec (MxµF)
(mean value: 100000 sec)
Measuring voltage: 100V/1 min.
Test voltage: 2 sec
L < 2000VDC 2500VDC > 3000VDC
< 41.5
41.5
57
1.6 Ur
1.4 Ur
1.2 Ur
1.4 Ur
1.4 Ur
1.2 Ur
1.2 Ur
1.2 Ur
1.2 Ur
Dissipation factors at +20°C: tan
Dielectric absorption:
0.05%
Voltage derating:

A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 1 fit (0.5 x Ur and 40°C)
Specific dissipation:

Box size
W x H x L
in mm

Specific dissipation
in Watts per K above the
ambient temperature
35x50x57
45x55x57
45x65x57

0.132
0.164
0.184

* other box sizes

 

Graphs:

Soldering:

at f C < 0.1 µF 0.1 µF < C < 1.0 µF C > 1.0 µF
1kHz
10kHz
100kHz
< 3 x 10-4
< 4 x 10-4
<
15 x 10-4
< 3 x 10-4
< 6 x 10-4
-
< 3 x 10-4
-
-
Maximum pulse rise time: for pulses equal to the rated voltage
Capacitance
pF/µF
max. pulse rise time V/µsec at TA < 40°C
100VDC 250VDC 400VDC 630VDC 1000VDC 1600VDC 2000VDC 2500VDC 3000VDC
1000...2200
3300...6800
0.01 ...0.022
0.033...0.068
0.1...0.22
0.33...0.68
1.0...2.2
3.3...4.7
6.8...15
22...47
1250
1150
900
500
250
130
90
65
45
30
2300
1500
1400
1000
650
390
250
100
65
45
2300
1500
1500
1150
650
500
250
130
90
45
2300
1500
1500
1400
1150
900
500
190
160
-
3500
3500
2700
2700
1800
1150
500
230
-
-
7000
7000
3800
2700
1800
1150
650
330
-
-
11500
11500
4400
2700
1800
1150
650
-
-
-
11500
11500
11500
-
-
-
-
-
-
-

-
-
-
2700
1800
1150
500
-
-
-

 
Mechanical Tests   Packing
Pull test on pins:
d < 0.8 Ø: 10 N in direction of pins
d > 0.8 Ø: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29
  Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm.

Detailed taping information:


Example for ordering / Part number:
 

 

Page 2