You are here: Home ProductsFilm/Foil Capacitors in PCM 7.5 - 15 mmFKP 3 page 1
|
| |
Polypropylene (PP) Film and
Foil Capacitors
for Pulse Applications in
PCM 7.5 mm to 15 mm |
|
| |
| Special
Features |
 Pulse
duty construction
Very low dissipation factor
Negative capacitance change versus
 temperature
Very low dielectric absorption
According to RoHS 2002/95/EC |
| Typical
Applications |
For high
frequency applications e.g.
Sample and hold
Timing
LC-Filtering
Oscillating circuits
Audio equipment |
| Construction |
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Metal foil
Internal construction: |
 |
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal:
Yellow. |
|
|
| Electrical Data |
Capacitance
range:
100 pF to 0.22 µF
(E12-values on request)
Rated voltages:
63VDC, 100VDC, 250VDC, 400VDC, 630VDC,
1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
-55°C to +100°C
Test specifications:
In accordance with IEC 60384-13 and
EN 131800
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20°C:
> 5 x 105 M (mean value: 1 x 106 M)
Measuring voltage:
Ur = 63V: Utest = 50 V/1 min.
Ur > 100V: Utest = 100 V/1 min.
Dissipation factors at +20°C:
tan |
|
Test
voltage:
2 Ur, 2 sec
Maximum pulse rise time:
1000 V/µsec for pulses equal to the rated
voltage
Dielectric absorption:
0.05%
Temperature coefficient:
-200 x 10-6/°C (typical)
Voltage derating:
A voltage derating factor of 1.35% per K must be
applied from +85°C for DC voltages and from
+75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 5 fit (0.5 x Ur and
40°C)
Graphs:
Soldering: |
| at f |
C < 0.1 µF |
0.1 µF < C < 0.22 µF |
1kHz
10kHz
100kHz |
< 4 x 10-4
< 5 x 10-4
< 10 x 10-4 |
< 3 x 10-4
< 6 x 10-4
- |
|
| |
| Mechanical
Tests |
|
Packing |
Pull
test on leads:
10 N in direction of leads according to
IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29 |
|
Available
taped and reeled.
Detailed taping information:
Example for ordering / Part
number: |
|
| |
Page 2 |
|
