Home About us Products Technical Info Samples Sales Network News Contact Parametric Search Stock Search
ImprintPrint page
Products:
SMD Capacitors
Capacitors in PCM 2.5 mm 
Film/Foil Capacitors in PCM 5 - 15 mm 
Metallized Capacitors in PCM 5 - 52.5 mm 
Pulse Capacitors 
RFI Capacitors 
Filter Capacitors 
Snubber Capacitors 
GTO Capacitors 
DC-Link Capacitors 
PowerBlock 

You are here: HomeProductsPulse CapacitorsFKP 1 page 1

Overview

 

MKP 10

 

FKP 1

 

PDF-File

 

 

Continuation page 2
   
Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes and Metallized Internal Series Connection in PCM 15 mm to 52.5 mm. Capacitances from 100 pF to 4.7 µF. Nominal Voltages from 400 VDC to 6000 VDC.
 
Special Features
Extremely high pulse duty
Self-healing
Internal series connection
Very low dissipation factor
Negative capacitance change versus
temperature
According to RoHS 2011/65/EU
Typical Applications
For high pulse and high frequency applications e.g.
Switch mode power supplies
Converter in drives and power electronics
Deflection systems in monitors
and TV-sets
Electronic ballasts
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Aluminium foil and double-sided metallized plastic film
Internal construction:
Construction WIMA FKP 1
Encapsulation:
Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal: Yellow
Electrical Data
Capacitance range:
100 pF to 4.7 µF (E12-values on request)
Rated voltages:
400VDC, 630VDC, 1000VDC, 1250VDC, 1600VDC, 2000VDC, 4000VDC, 6000VDC
Capacitance tolerances:
±20%, ±10%, ±5% (other tolerances are available subject to special enquiry)
Operating temperature range:
-55°C to +100°C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance
at +20°C:
C < 0.1 µF: > 1 x 105 M
(mean value: 5 x 105 M)
C > 0.1 µF: > 30000 sec (MxµF)
(mean value: 100000 sec)
Measuring voltage: 100V/1 min.
Dissipation factors at +20°C: tan
Test voltage:
2 Ur, 2sec / 6 kV: 1.6 Ur, 2sec
Dielectric absorption:
0.05%
Voltage derating:

A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 1 fit (0.5 x Ur and 40°C)



Graphs:

Soldering:
at f C < 0.1 µF 0.1 µF < C < 1.0 µF C > 1.0 µF
1kHz
10kHz
100kHz
< 6 x 10-4
< 6 x 10-4
<
10 x 10-4
< 6 x 10-4
< 6 x 10-4
-
< 6 x 10-4
-
-
Maximum pulse rise time: for pulses equal to the rated voltage
Capacitance
pF/µF
max. pulse rise time V/µsec at TA < 40°C
400VDC 630VDC 1000VDC 1250VDC 1600VDC 2000VDC 4000VDC 6000VDC
100...220
330...680
1000...2200
3300...6800
0.01 ...0.022
0.033...0.068
0.1...0.22
0.33...0.68
1.0...2.2
3.3...4.7
-
-
29000
9000
9000
9000
7000

6000
5000
2500
-
-
29000
14000
11000
11000
11000
10000
6600
-
-
-
29000
27000
11000
11000
11000
11000
8300
-
-
-
29000
29000
11000
11000
11000
11000
9500
-
56000
51000
46000
29000
11000
11000
11000
11000
11000
-
56000
56000
51000
29000
13000
11000
11000
11000
-
-
-
56000
51000
29000
13000
13000
13000
-
-
-
-
56000
51000
29000
13000
13000
13000
-
-
-
 
Mechanical Tests   Packing
Pull test on pins:
d < 0.8 Ø: 10 N in direction of pins
d > 0.8 Ø: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29
  Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm.

Detailed taping information:


Example for ordering / Part number:
 

 

Continuation page 2