Home Über WIMA Produkte Technische Info Muster Vertriebsnetz News Kontakt Parametersuche Lagerliste
ImpressumPrint page
Produkte:
SMD-Kondensatoren
Kondensatoren im RM 2.5 mm 
Film/Folien-Kondensatoren im RM 5 - 15 mm 
Metallisierte Kondensatoren im RM 5 - 52.5 mm 
Impulskondensatoren 
Funk-Entstörkondensatoren 
Filterkondensatoren 
Snubber Kondensatoren 
GTO Kondensatoren 
DC-Link Kondensatoren 
PowerBlock 

Sie sind hier: HomeProdukteFunk-EntstörkondensatorenMP 3-X2 Seite 1

Übersicht

 

MKP-X2

 

MKP-X1 R

 

MKP-Y2

 

MP3-X2

 

MP3-X1

 

MP3-Y2/3R-Y2

 

PDF-Datei

 

 

WIMA MP 3-X2 Fortsetzung Seite 2
 
Funkentstörkondensatoren der Klasse X2 aus metallisiertem Papier in den Rastermaßen 10 mm bis 27,5 mm. Kapazitätswerte von 1000 pF bis 1 µF. Nennspannungen 250 V~ und 275 V~.
 
Special Features

Particularly high reliability against active
and passive flammability
Excellent self-healing as well as high
voltage strength
High degree of interference suppression
due to good attenuation and low ESR
For temperatures up to +110°C
According to RoHS 2011/65/EU

Typical Applications
Class X2 RFI applications to meet EMC regulations
Capacitors connected to the mains
between phase and neutral or phase and
phase conductors
General requirements, pulse peak
voltage < 2.5 kV
Construction
Dielectric:
Paper, epoxy resin impregnated
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Aufbau WIMA MP 3-X2

Encapsulation:
Self-extinguishing epoxy resin, UL 94 V-0, metal foil

Terminations:
Tinned wire
Marking:
Marking: Black on Silver

Electrical Data
Capacitance range:
1000 pF to 1.0 µF (E12-values on request)
Rated voltages:
250VAC, 275VAC

Continuous DC voltage* (general guide):

< 630V

Capacitance tolerance: ±20%
Operating temperature range:
-40°C to +110°C
Climatic test category:
40/110/56/C in accordance with IEC
Insulation resistance
at +20°C:
C < 0.33 µF: > 12 x 103 M
C > 0.33 µF: > 4000 sec (MxµF)
Measuring voltage: 100V/1 min.
Dissipation factors:
tan < 13 x 10-3 at 1kHz and +20°C
Test specifications:

In accordance with IEC 60384-14
Approvals:
Maximum pulse rise time:
Capacitance
pF/µF
Pulse rise time V/µsec
max. operation
1000...0.068
0.1...0.33
0.47
0.68...1.0
1500
750
500
250
for pulses equal to a voltage amplitude with x UAC = 390V according to IEC 60384-14
Test voltage: 1300VDC, 2sec
Reliability:
Operational life > 300000 hours
Failure rate < 1 fit (0.5 x Ur and 40°C)


Graphs:

Soldering:
Country Authority Specification Symbol Approval-No.
Germany

USA/Canada
VDE

UL
IEC 60384-14/3

UL 60384-14
CAN/CSA-E60384-14
VDE
UL
89749

E 100438
 
Mounting recommendation   Packing
To minimize or avoid shock and/or vibration stresses to terminating wires and solder connections we recommend to fix voluminous resin-potted MP capacitors as from e.g. PCM 22.5mm in an appropriate way since for constructional reasons they do not sit tight on the board.   Available taped and reeled up to and including PCM 22.5mm

Detailed taping information:


Example for ordering / Part number:

* If safety-approved EMI suppression capacitors are operated with a DC voltage being above the specified AC voltage rating the given approvals are no longer valid (DIN EN 60384-14).

 

Furthermore the permissible pulse rise time du/dt (Fmax.) will be subject to a reduction according to

 

Fmax. = Fr x x UAC / UDC

 

if the DC operating voltage UDC is higher than x UAC

 

 

Fortsetzung Seite 2